Doyle Tool & Gauge

 

Doyle Tool & Gauge Co.

Worthington Works
2181 Eastwood lane
Eugene, Ore 97401

541-431-0077
Fax 541-431-0929

Doug Worthington
wworks@q.com

DT-1000

Doyle 5/8” Roller Bar Height Gauge

Description:  This tool is consists of a 1” travel dial indicator mounted in an aluminum fixture that rests on the knife tip. It is held flat against the back face of the knife by magnets. Hardened dowels provide for a non-wear seat for the knife tip.

Usage:  This tool sits on the knife tip and the indicator foot rests atop the roller bar. The indicator measures the roller bar’s center line above the knife tip.

Benefits:This tool allows a precise roller bar height setting (within .001”). It allows a parallel roller bar height setting from dog side to tail side. This tool can also be used to quickly check the knife height in the center of the lathe by measuring the distance from the roller bar top to the knife.

Contact Us for Price and Availability

      Back to Tool List      Next >>

DT-1000 Roller Bar Height Gauge