Doyle Tool & Gauge

 

Doyle Tool & Gauge Co.

Worthington Works
2181 Eastwood lane
Eugene, Ore 97401

541-431-0077
Fax 541-431-0929

Doug Worthington
wworks@q.com


DT-1010

Doyle Roller Bar Height Gauge for Big Bar

Description:  This tool is consists of a 1” travel dial indicator mounted in an aluminum fixture that rests on the knife tip. It is held against the face of the knife with magnets. Hardened dowels provide for a non-wear seat for the knife tip.

Usage:  This tool sits on the knife tip and the indicator foot rests atop the roller bar. The indicator measures the roller bar’s center line above the knife tip. This tool can be used on any diameter roller bar.

Benefits: This tool allows a precise roller bar height setting (within .001”). It allows a parallel roller bar height setting from dog side to tail side. This tool can also be used to quickly check the knife height in the center of the lathe by measuring the distance from the roller bar top to the knife.

Contact Us for Price and Availability

<< Previous      Back to Tool List      Next >>

DT-2060 Centering Head Gauge with Level