Doyle Tool & Gauge

 

Doyle Tool & Gauge Co.

Worthington Works
2181 Eastwood lane
Eugene, Ore 97401

541-431-0077
Fax 541-431-0929

Doug Worthington
wworks@q.com

DT-2000

Doyle Centering Head Gauge with Machinist Level and Magnets

Description:  This tool is comprised of a digital readout micrometer thimble mounted in an aluminum centering head fixture and a six inch machinist level. Magnets in each leg of the gauge hold it securely to the lathe spindle, eliminating slipping and sliding.

Usage:  The “V” of the centering head sets against the extended spindle and the micrometer foot rests on the tip of the knife.  With the digital readout micrometer thimble set at 1.000 and the machinist level at level (this indicates that your knife is set at exact spindle center).

Example:  To set your knife at .025 above spindle center, set the micrometer thimble at 1.025 when machinist level is level, you are set at .025 above spindle center.

To set your knife at .025 below spindle center, set the micrometer thimble at 0.975 when machinist level is level, you are set at .025 below spindle center.

Contact Us for Price and Availability

<< Previous      Back to Tool List      Next >>

DT-2000 Doyle Centering Head Gauge with Machinist Level